Star Micronics NX-2450 User Manual page 144

I
Print quadruple-density 8-bit graphics
MODE
ASCII Decimal Hexadecimal
Both
<ESC> "Z" nl
27 90 nl IB 5A nl
n2 ml m2
n2 m 1 m2 n2 ml m2
... .,.
Prints bit-image graphics at 240 dots per inch horizon-
tally (maximum 1920 dots wide), skipping every second
dot in the horizontal direction. See the cESC> "K" com-
mand for other information.
Print hex-density 24-bit graphics
MODE ASCII Decimal Hexadecimal
Std.
<FS> "Z" nl
28 90 n] IC 5A nl
n2 ml m2
n2 ml m2 n2 ml m2
m3
m3 . . m3 .
Prints 24-bit dot graphics at 360 dots per inch horizon-
tally. The graphics image is 24 dots high and rd + n2 x
256 dots wide. Maximum width is 8 inches (2880 dots).
In the data ml, ti, m3 ... each three bytes represent 24
vertical dots. In the leftmost position, the most signifi-
cant bit of ml is the top dot; the least significant bit of
ml !is the eighth dot from the top; the most significant
bit of m2 is the ninth dot; the least significant bit of m2
is the sixteenth dot from the top; the most significant bit
'of m3 is the seventeenth dot from the top; the least sig-
nificant bit of m3 is the bottom dot. The rest of the data
is organized in the same way. The number of data bytes
must be 3 x (n] + n2 x 256). Dots beyond the right mar-
gin are ignored. On completion of dot graphics printing,
the printer returns automatically to character mode.
Page135