Star Micronics NX-2450 User Manual page 134

S line spacing to n/60 inch or n/72 inch
MODE ASCII Decimal Hexadecimal
Both <E SC> "A" n 27 65 n IB 41 n
In Standard mode, sets the distance the paper advances
or reverses in subsequent line feeds to n/60 inch, where
n is between O and 255. If n = O, the line spacing is set to
o.
In IBM mode, this command defines the distance the
paper advances or reverses in subsequent line feeds to
n/72 inch, where n is between 1 and 85. The new line
spacing does not take effect until the next <ESC> "2"
command.
ExecutecESC> "A"
MODE ASCII
Decimal Hexadecimal
IBM
<E SC> "2" 27 50 IB 32
Sets the line spacing to the value defined by the last pre-
ceding <ESC> "A" command. Sets the line spacing to
1/6 inch if there is no preceding <ESC> "A" command.
Line feed
MODE ASCII Decimal Hexadecimal
Both <:F>
10 OA
Prints the current line and advances the paper to the
next line. The line spacing is set by one of the com-
mands listed previously.
Page125