Setting Temperature Set Back - ActronAir LC7-2W Operation Manual

Hide thumbs Also See for LC7-2W:

Table of Contents

Operation Manual

4. Press the

5. Press the PROG button to confirm the selection.

6. Press the EXIT button thrice to go back to Main Screen.

13.03.02. Setting Temperature Set Back

NOTE

The Set back mode Cool to and Heat to limits can only be adjusted from the temperature set back menu. In the

occurrence of when the unit's setpoint (prior to Set back operation) is below the Heat to limit or higher than the

Cool to limit, the unit's setpoint will automatically become the new Set back limit.

1. Press the

PROG button to enter program Menu.

2. Press the

3. Press the PROG button to enter Program Menu 03. Display will show set back display ON field is blinking.

buttons to scroll from OFF to ON.

buttons to navigate to Program Menu 03.

Operation Manual - LC7-2 Wall Control

Document: 0525-080 Ver. 1 190923

LC7-2 Wall Control

Table of Contents

Show Quick Links

Table of Contents

Lc7-2g