Turn Air Conditioner On/Off; Adjusting Set Temperature; Changing Operating Mode - ActronAir LC7-2W Operation Manual

Operation Manual

08. Turn Air Conditioner On/Off

NOTE
The air conditioning system will re-start on your last settings and operating mode e.g. 22
HIGH fan speed.
The display will show the Set Temperature, Fan Speed, Fan Mode and Mode of Operation.
08.01. Turn On the Air Conditioner
1. Press the

09. Adjusting Set Temperature

Press either the
NOTE
• For a WARMER room temperature, press
• For a COOLER room temperature, press
• The Set Temp is adjustable between 16°C and 30°C in 0.5°C increments.
• The Set Temp is adjustable in control even when the system is Off.
• No Set Temp displayed during Fan-Only Mode.

10. Changing Operating Mode

NOTE
For all modes of operation,
the 3-Speed Fan setting option is selected. Otherwise MED and MED CONT are available for 1-Speed Fan.
NOTE
When in Fan-Only Mode LOW CONT, MED CONT and HIGH CONT will not be available
NOTE
When the system is ON, the Indoor Fan can run continuously and is indicated by the CONT indicator on the LCD. This is
generally preferred during the Cooling Mode to ensure maximum air circulation. When set to LOW, MED or HIGH the fan will
cycle with the compressor operation according to set point and room temperatures.
button once to turn On and Press the
or buttons to either increase or decrease the temperature correspondingly.
LOW, MED, HIGH, LOW CONT, MED CONT and HIGH CONT Fan Speeds can only be selected if
Operation Manual - LC7-2 Wall Control
Document: 0525-080 Ver. 1 190923
LC7-2 Wall Control
button once again to turn Off.
the button .
the button .
o
C set temperature, AUTO mode,
9