Timer Operation; Auto Operation; Off Timer - ActronAir LC7-2W Operation Manual

Hide thumbs Also See for LC7-2W:

Table of Contents

Operation Manual

1. Press the MODE button until AUTO appears on the display.

2. Set the desired temperature by pressing either the

by pressing the FAN button.

3. Available settings are: LOW, MED, HIGH, CONT LOW, CONT MED AND CONT HIGH.

NOTE

Setting the indoor fan speed to continuous mode can cause cool drafts when operating the system on heating cycle

during compressor off cycles.

11. Timer Operation

NOTE

Setting up the timer operation can only be made via Wall Control 1 (C-1). When you press TIMER button on Wall Control 2

or 3, it will show C-2 or C-3 in the display. This is to indicate that the wall control is not the C-1 wall control, and setting up

the timer is not possible.

1. Press the TIMER button to enter the timer menu.

NOTE

The system must be On to set OFF timer.

2. Press the

OFF.

The maximum adjustable timer hours are 24 with 0.5 hour (30 minute) adjustable increments.

buttons to select the desired time for the system to remain operating before turning

Operation Manual - LC7-2 Wall Control

Document: 0525-080 Ver. 1 190923

LC7-2 Wall Control

buttons. Adjust the desired Indoor Fan speed

■

Table of Contents

Show Quick Links

Table of Contents

Lc7-2g