Operation Manual
8. When the MODE button is pressed. The
change mode.
NOTE
To disable Mode Lock, follow the same steps above. However, in step 5 select OFF.
13.05. Setpoint Lock
NOTE
• Setpoint Lock will prevent user from changing the setpoint on wall controller.
• Setpoint Lock may be set independently on each wall controller connected.
13.05.01. Activating Setpoint Lock
1. Set the setpoint based on the desired target temperature.
2. Press the
3. Press the
30
PROG button to enter program Menu.
buttons to navigate to Program Menu 05.
or
Operation Manual - LC7-2 Wall Control
Document: 0525-080 Ver. 1 190923
LC7-2 Wall Control
symbol will appear for 3 seconds and user won't be able to