Operation Manual
14. Filter Timer
14.01. Reset Filter Timer
NOTE
Ensure control is turned OFF before proceeding to resetting Filter Timer
1. Screen flashes FILTER when timer expires.
2. After cleaning the filter, press the
15. After Hours
NOTE
• AFTER HOURS status is disabled (OFF) by default.
• For the AFTER HOURS run timer to operate, the TIME CLOCK operation has to be enabled.
• If the AFTER HOURS run timer overlaps with the scheduled TIME CLOCK event ON, the unit will continue running with
AFTER HOURS indicator displayed on the screen. Once the overlapped AFTER HOURS run timer expires, the control will
turn OFF until the
• If the AFTER HOURS run timer expires earlier than the current TIME CLOCK event ON, the unit will continue operating
to the current TIME CLOCK schedule.
15.01. Turning on/off and Setting After Hours Function
1. Press the AFTER HRS button. After hours timer, AFTER HOURS and OFF indicators will be displayed.
button to reset the timer. Flashing FILTER display will disappear.
button is pressed again of the next scheduled ON event occurs.
Operation Manual - LC7-2 Wall Control
Document: 0525-080 Ver. 1 190923
LC7-2 Wall Control
35