Battery Handling; Inserting And Removing A Battery - Agilent Technologies E6001A User Manual

Battery Handling

N O T E
N O T E
Battery cap
E6000C Mini-OTDR User's Guide, E0302
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The submodule slips easily in and out of its slot (Figure
21). When the submodule is in place, you can now connect
an Optical Output Connector and a fiber, and lock the
module.
Battery Handling

Inserting and Removing a Battery

The battery should be inserted in the slot at the foot of the
Mini-OTDR (see Figure 22.)
Make sure that you insert the battery in the correct
direction, and that you close the battery cap correctly.
Only use the Agilent spare NiMH battery pack (Agilent
Product Number E6080A) or comparable batteries. Other
batteries may be damaged by the Mini-OTDR battery
charger
Before inserting or removing the battery, pull down the
cap at the bottom of the right-hand side of the machine.
The battery will then slide in and out.
2 Additional Features
75