Batch Configuration Capabilities; Management - Digi Connect Wi-SP User Manual

Digi Connect and ConnectPort TS Family web interface

Batch configuration capabilities

If you need configure multiple Digi devices, use the batch configuration capabilities to upload
configuration files through the Digi Connect Programmer utility. The Digi Connect Programmer utility
is a command-line-based interface to Digi devices. Use this utility to upload firmware, files,
configuration settings and factory defaults to a Digi device. You can run it from the command line on a
computer that uses the Microsoft Windows operating system.
You can download the Digi Connect Programmer utility from the
The following table list some of the available commands.
Command
connectprog /help
connectprog /discover
connectprog set /mac=<mac address> /ip=<ip
address>
connectprog /info /destip=<ip address>
/username=root /password=dbps
connectprog /backup /destip=<ip address>
/username=root /password=dbps
connectprog /upload /destip=<ip address>
/config=<directory path>\<file name>.txt
/username=root /password=dbps
The following example displays the results for the discover command:
connectprog /discover
Digi Connect Programmer
Version 1.6.25.0
Copyright 2003-2009 Digi International Inc.
Searching for devices. Please wait...
IP Address
-----------------+-------------------+------------------------------
192.168.1.4
-----------------+-------------------+------------------------------
1 device found.

Management

Use the Management menu to view and manage connections and services for the Digi Connect and
ConnectPort TS Family product.
You can monitor the port, device, system, and network activities of Digi Connect and ConnectPort TS
Family devices from a variety of interfaces. Changes in data flow may indicate problems or activities
that may require immediate attention.
Digi Connect Family and ConnectPort TS Family
| MAC Address | Model
00:40:9D:12:34:56
Digi website.
Description
Displays the complete list of available command
options.
Discovers devices on the local LAN. This is
equivalent to using the Digi device Discovery
utility.
Sets the IP address for the device at the
identified MAC address.
Displays device information for the specific
device.
Backs up the complete device configuration to
config.rci in the local directory.
Uploads the configuration file to the device.
ConnectPort TS 16
Management
95