Digi Connect Wi-SP User Manual page 89

Digi Connect and ConnectPort TS Family web interface
Enable Exclusive Mode: Exclusive mode allows a single connection from any one RealPort
l
client ID. If you enable this setting and a subsequent connection occurs that has the same
source IP as an existing connection, the existing connection is forcibly reset under the
assumption that it is stale.
Device Initiated RealPort Settings:
n
Index: An empty list means there are no configured device-initiated RealPort connections.
l
Host or IP Address: The IP address or DNS name of the client to connect to.
l
Port: The network port to connect to on the client. The default port for VNC servers is
l
8771.
Retry Time: The amount of time in seconds to wait before reattempting a failed
l
connection to the client.
Ekahau Client™
Use the Ekahau Client page to configure Ekahau Client device-location software for a Digi devices
with Wi-Fi capability.
The Ekahau Client feature provides integrated support for Ekahau's Wi-Fi device-location solution,
called the Ekahau Positioning Engine, on the Digi Connect Wi-ME, Digi Connect Wi-EM, and Digi Connect
Wi-SP products. Ekahau offers a complete access point vendor-independent real-time location system
for wireless LAN devices that is capable of pinpointing wireless LAN devices such as the Digi Connect
products, laptops, PDAs, or other intelligent Wi-Fi enabled devices. The solution provides floor-, room-
and door-level accuracy of up to 3.5 feet (1 m). The patented Ekahau positioning technology is based
on simple signal-strength calibration maps, and enables customers to fully leverage an existing
wireless LAN infrastructure without any need for proprietary hardware components.
Visit www.ekahau.com
Positioning Engine and Ekahau Site Survey software products.
Ekahau Client configuration settings include:
Digi Connect Family and ConnectPort TS Family
for additional information, including free evaluation licenses for the Ekahau
Configuration through the web interface
89