Digi Connect Wi-SP User Manual page 19

Digi Connect and ConnectPort TS Family features
Raw TCP connection: The Digi Connect and ConnectPort TS Family initiates a raw TCP socket
n
connection to a remote entity.
Telnet connection: The Digi Connect and ConnectPort TS Family initiates a TCP connection
n
using the telnet protocol to a remote entity.
Raw TLS encrypted connection: The Digi Connect and ConnectPort TS Family initiates an
n
encrypted raw TCP socket connection to a remote entity.
Rlogin connection: The Digi Connect and ConnectPort TS Family initiates a TCP connection
n
using the rlogin protocol to a remote entity.
Command-line interface (CLI)-based client connections
CLI-based client connections are available for use when you establish a session with the Digi Connect
and ConnectPort TS Family product's CLI. CLI-based client connections include:
ssh: Allows you to connect to a remote entity using the ssh protocol.
n
telnet: Allows you to connect to a remote entity using the telnet protocol.
n
rlogin: Allows you to connect to remote entity using the rlogin protocol (bash only).
n
scp: Allows you to transfer files (bash only).
n
connect: Begin communicating with a local serial port.
n
Note Additional communication methods include using a bash shell such as scp, tftp, nc, or using
Python.
Modem emulation (pseudo-modem) client connections
When a port is in the modem-emulation or pseudo-modem mode, it can initiate network connections
based on AT command strings received on the serial port. See the Digi Connect® Family Command
Reference on www.digi.com
Digi Connect Family and ConnectPort TS Family
for modem emulation AT commands.
Network connections and data paths
19