Digi Connect Wi-SP User Manual page 152

Troubleshooting
LED/button
Diag LED
C1 and C2 LEDs
Reset button
Serial TX
Serial RX
Ethernet Link LED
Ethernet Activity LED
ConnectPort TS 16 48VDC
Digi Connect Family and ConnectPort TS Family
Color and Light
Pattern Description
Amber Blinks during product initialization and factory
reset, using the light patterns below. This LED
should never blink during normal operation. If it
blinks constantly, contact Digi Technical Support.
1-1-1 blinking Initializing firmware.
amber
1-5-1 blinking Device configuration has been restored to its
amber factory defaults.
Other blinking Contact Digi Technical Support.
amber
Solid amber Device is powered on and ready for operation.
Green You can use these LEDs with custom applications
running on the unit.
N/A Performs equivalent of a power-cycle.
Yellow Serial port is transmitting data.
Green Serial port is receiving data.
Solid green Ethernet link is up. Will light solid green when an
active LAN connection is plugged into the
Ethernet port.
Blinking yellow Blinks when active traffic is on the LAN
connection.
System status LEDs
152