General; Areas Of Application; System Requirements; Identifying The Interface - JUMO LOGOSCREEN nt Interface Description

2.1 Areas of application

2.2 System requirements

2.3 Identifying the interface

The paperless recorder has several interfaces:
- as standard: a TTL setup connector on the front panel, and on the back
(only for a Modbus slave)
- as standard: serial interface RS232 or RS485 (Modbus slave, Modbus
master, bar code)
for communication with the bus system or a PC. This can be used to read
out measurements or other device and process data from the paperless
recorder.
- as standard: Ethernet 10/100 Mbit/sec
for communication with the instrument via a network (setup, browser,
Modbus-TCP, e-mail alarm)
- optionally: serial interface RS232
for the connection of a bar code reader (Modbus slave, Modbus master, bar
code)
The following items are required for operating the serial interface:
- Connecting cable:
for RS232 / RS485 e.g.
PC interface
with TTL/RS232 converter and adapter
PC interface
with USB/RS232 converter and adapter
for Ethernet interface, e.g.
RJ 45 patch cable, CAT 5 or better (crossover)
- setup or evaluation program, e.g.
setup program:
PC evaluation software PCA3000
PCA communications software PCC
JUMO SVS-2000 visualization:
- PC or notebook
The interface for RS232 or RS485 and the Ethernet interface are available in
every instrument.
The RS232 serial interface for connecting a bar code reader and the Profibus-
DP interface are options.

2 General

Part No. 70/00350260
Part No. 70/00456352
Part No. 70/00468991
Part No. 70/00431882
Part No. 70/00431879
data sheet 70.0753
7