Introduction; Preface - JUMO LOGOSCREEN nt Interface Description

1.1 Preface

Please read this interface description before commissioning the interfaces for
the instrument. Keep the interface description in a place which is accessible to
all users at all times.
Please assist us to improve this interface description, where necessary.
Your comments will be appreciated.
Phone +49 661 6003-0
Fax +49 661 6003-607
All the necessary information for operating the interface is
contained in this interface description. However, if any difficulties
should still arise during start-up, please do not carry out any
unauthorized manipulations. You could endanger your rights under
the instrument warranty!
Please contact the nearest subsidiary or the head office in such a
case.
E When returning modules, assemblies or components, the
regulations of EN 100 015 "Protection of electrostatically sensitive
components" must be observed. Use only the appropriate ESD
packaging for transport.
Please note that we cannot accept any liability for damage caused
by ESD.
ESD = electrostatic discharge

1 Introduction

5