Jumo Error Codes As Integer Return Values - JUMO LOGOSCREEN nt Interface Description

Example

4.9.3 JUMO error codes as integer return values

Error codes
Data request:
01 03 1259
Response:
01 03 04
The measurement 0x7DB48E52 (= 3.0 x 10
(Modbus address 0x1259) shows that the input value is invalid.
For some lengthy sequences, such as the transfer of a program to a JUMO
controller or e-mail delivery, an error code is entered in an event field or the
event list at the end. The error codes are the same for all JUMO instruments.
Error code Description
Error list: Program memory management
1 program cannot be created
2 program not available
3 program cannot be deleted
4 segment cannot be deleted
5 checksum cannot be saved
6 checksum cannot be read
7 program cannot be copied
8 segment cannot be copied
9 program checksum error
10 program pointer tab. checksum error
11 program memory end
12 segment not available
13 repeat jump mark cannot be corrected
4 Modbus protocol description
0002 1160
8E52 7DB4 51ED
37
) delivered by analog input 2
27