JUMO LOGOSCREEN nt Interface Description page 14

3 Connecting the interface
Manual IP
address
Subnet mask
Standard
gateway
Port Modbus
TCP
DNS server
Transfer rate
14
An assigned address can be altered by the DHCP server. For
example, if the PCA communications software is used for the
automatic collection of data, then the address must be altered
within the software.
The automatically assigned IP address can be read in the menu Device
!
manager Device info
If automatic IP address assignment is not used (DHCP = OFF), then the IP
address for the paperless recorder is set up here.
If automatic IP address assignment is not used (DHCP = OFF), then the subnet
mask is set up here.
The subnet mask is used to gather devices (PC, recorders etc.) together to
form subnets. All devices that have an IP address that is AND linked to the
subnet mask belong to one subnet and can communicate with one another.
If devices outside the subnet need to be accessed, then the communication
must be handled by a gateway (standard gateway).
If automatic IP address assignment is not used (DHCP = OFF), then the IP
address for the standard gateway is set up here.
The standard gateway is used for communication with devices that do not
belong to the subnet.
The port address must be set if the paperless recorder needs to be accessed
by visualization software, and the Modbus TCP protocol (Modbus tunneling:
outer frame = Ethernet, inner frame = Modbus) is to be used.
Any change to this parameter will only becomes effective after the
recorder has been restarted!
This is used to set up the IP address for a DNS server that is installed in the
network. The DNS server is required to resolve the name for e-mail transfer via
Ethernet.
Any change to this parameter will only become effective after the
recorder has been restarted!
Here you can configure the transfer rate that is used for communication
between the paperless recorder and the DHCP server or other computers.
!
Eth. Info.