Taking Out Of Service; Short Interruption; Long-Term Interruption; Shutdown Of Device - Walther Systemtechnik SMS-13 Assembly Instructions Manual

Rev. 1.1

7 Taking out of Service

7.1 Short Interruption

A short interruption (15 min and more) will always be followed by a clean-spraying.
NOTE
Please follow the operating instructions!

7.2 Long-term Interruption

The following steps will be observed for a long-term interruption of the device/machine:

Depressurize material supply lines

Remove retainer ring (1) and clean airless-nozzle with a special thinner and a soft cloth. Make sure
that no cloth fibers are left on the nozzle tip.
NOTE
Please follow the maintenance instructions!

7.3 Shutdown of Device

The following is important for a shutdown of the machine / device:

Clean airless spray valve with a special thinner.
NOTE
Please follow the maintenance instructions!
Assembly Instructions - Spray Valve SMS-13
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 9 of 26