Operating Elements; Taking Out Of Service; Short Interruption; Long-Term Interruption - Walther Systemtechnik SMS-22 Assembly Instructions Manual

Rev. 1.3

6.3 Operating Elements

Regulating Screw

7 Taking out of Service

7.1 Short Interruption

A short interruption (15 min and more) will always be followed by a clean-spraying.
NOTE
Please follow the operating instructions!

7.2 Long-term Interruption

The following will be observed for a long-term interruption of the device/machine:

Depressurize material supply lines

Take air cap (2.1/2.2) off and clean nozzle (3) with a special thinner and a soft cloth. Make sure that no
cloth fibers are left on the nozzle tip.
NOTE
Please follow the maintenance instructions!

7.3 Shutdown of Device

The following is important for a shutdown of the machine / device:

Clean spray valve with a special thinner.
NOTE
Please follow the maintenance instructions!
Assembly Instructions - Spray Valve SMS-22
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 11 of 25