Correct Use; Incorrect Use; Qualification Of Personnel - Walther Systemtechnik SMS-13 Assembly Instructions Manual

Airless-spray valve
Table of Contents

Advertisement

Rev. 1.1

2.4 Correct Use

This device is a needle valve and will be used for processing materials which can be sprayed in continuous
or intermitting operation. Under no circumstances shall aggressive media such as acids, alkaline solutions,
detergents, chemicals or others be sprayed. If you are not sure, please contact the manufacturer if a certain
spray medium is suitable for this device.

2.5 Incorrect Use

Operating the device with insufficient knowledge about the operation, maintenance and care of the de-
vice.
Making changes, extensions or alterations on the device that may hamper its safety without the prior
consent of Walther Systemtechnik GmbH.
Operating the device with defective safety installations or not properly attached or malfunctioning safety
devices.
Using unsuitable materials.
Handling the device while energized

2.6 Qualification of Personnel

Only trained and instructed personnel may conduct work on the equipment.
The responsibilities of the personnel for assembly work, operation, repair work or maintenance work must be
clearly assigned to individuals!
Persons in training may work with the equipment only under supervision of an experienced person.
Personnel
Task
Packaging, Transport
Commissioning
Operation
Troubleshooting, general
Troubleshooting
mechanical
Troubleshooting electrical
Setting up
Maintenance
Repair
Taking out of service,
Storage
Assembly Instructions - Spray Valve SMS-13
Instructed
Personnel with Technical
Personnel
Qualification
X
X
-
-
-
-
-
-
-
X
X
X
-
X
X
X
X
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 5 of 26
Specialist Supervisor
-
-
X
-
-
X
-
-
-
X
-
-
-
-
-
X
-
X
-

Advertisement

Table of Contents
loading

Table of Contents