Taking Out Of Service; Short Interruption; Long-Term Interruption; Shutdown Of Device - Walther Systemtechnik WDV-01 Assembly & Instruction Manual

Dosing valves
Table of Contents

Advertisement

Rev. 1.2

7 Taking out of Service

7.1 Short Interruption

A short interruption (15 min or more) has to be followed by a fine dosing
IMPORTANT
Please follow the maintenance instructions!

7.2 Long-term Interruption

The following has to be observed for a long-term interruption of the device:
Make sure that system is depressurized (check all displays).
IMPORTANT
Please follow the maintenance instructions

7.3 Shutdown of Device

Please observe the following for a shutdown of the device:
Disconnect mains plug.
Depressurize complete systems (check all displays).
Grease / oil have to be disposed of properly.
Clean dosing valve with special thinner
CAUTION
Danger of accidents and to environment. Do not spill grease / oil. Grease / oil have to
be properly disposed of (hazardous material).
IMPORTANT
Please follow the maintenance instructions
Assembly Instructions – Dosing Valves WDV-0x
!
!
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 14 of 34

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wdv-02Wdv-04Wdv-03

Table of Contents