Electrical Installation, Control Terminals; To Connect The Cable To The Terminal; To Remove The Cable From The Terminal - GE AF-600 FP Operating Instructions Manual

3.1.18 Electrical Installation, Control Terminals

To connect the cable to the terminal:

1. Strip insulation by about 9-10 mm
2.
Insert a screwdriver
3. Insert the cable in the adjacent circular hole.
4. Remove the screwdriver. The cable is now mounted in the terminal.
3

To remove the cable from the terminal:

1.
Insert a screw driver
2. Pull out the cable.
1) Max. 0.4 x 2.5 mm
1.
28
1)
in the square hole.
1)
in the square hole.
AF-600 FP High Power Operating Instructions
2.
3.