The Quick Setup menu gives access to the most important setup parameters of the frequency converter. After programming the frequency converter will, in most

cases be ready for operation. The (see footnote) Quick Setup parameters are shown in the table below. A complete description of the function is given in the

parameter description sections of this manual.

Par.

par. K-01 Language

par. K-02 Motor Speed Unit

par. P-02 Motor Power [HP]

par. P-07 Motor Power [kW]

par. F-05 Motor Rated Voltage

par. F-04 Base Frequency

par. P-03 Motor Current

par. P-06 Base Speed

par. F-01 Frequency Setting 1

par. F-02 Operation Method

par. F-07 Accel Time 1

par. F-08 Decel Time 1

par. F-10 Electronic Overload

par. F-15 Motor Speed High Limit [Hz]

par. F-16 Motor Speed Low Limit [Hz]

par. F-17 Motor Speed High Limit [RPM]

par. F-18 Motor Speed Low Limit [RPM]

par. H-08 Reverse Lock

par. P-04 Auto Tune

Table 7.1: Quick Setup parameters

*The display showing depends on choices made in par. K-02 Motor Speed Unit and par. K-03 Regional Settings. The default settings of par. K-02 Motor Speed

Unit and par. K-03 Regional Settings depend on which region of the world the frequency converter is supplied to but can be re-programmed as required.

For a detailed information about settings and programming, please see the AF-600 FP Programming Guide

AF-600 FP High Power Operating Instructions

[Units]

[HP]

[kW]

[V]

[Hz]

[A]

[RPM]

[s]

[Hz]