Observe Environmental Regulations; Designated Equipment Use - Deprag MICROMAT-E 320E19-0008 Operating Instruction Booklet

1.7. Observe Environmental Regulations

When working on or with the equipment, it is imperative to
observe all requirements in regards to waste-disposal and
proper recycling.
Especially during installation, repair or maintenance, water
damaging agents such as
·
·
·
·
must not leak into the ground or into the sewage system!
Such materials must be stored, transported, contained and
recycled in suitable containers.
2

Designated Equipment Use

The EC-Screwdriving System is exclusively designed for screw-assembly in an
industrial environment. The system is especially well suited for assembly areas
with high demands in regards to quality, flexibility and documentation.
The Screwdriver Spindles of the series 320E... are designed for the stationary
use in
·
Construction Slide Units
·
Multi-Spindle Screwdriving Stations
·
Cartesian Screwdriving Robots
·
Gantry Screwdriving Cells
The DEPRAG EC Screwdriver Spindles allow free programming of the screw
tightening process. Within the power range of the selected spindle,
·
the torque value,
·
the speed,
·
the stand-by and
·
the direction of rotation
can be adjusted individually to the assembly requirement.
lubricating grease and oil
hydraulic fluid
cooling agents
solvent-containing cleaning agents
9