1.7. Observe Environmental Regulations
When working on or with the equipment, it is imperative to
observe all requirements in regards to waste-disposal and
proper recycling.
Especially during installation, repair or maintenance, water
damaging agents such as
must not leak into the ground or into the sewage system!
Such materials must be stored, transported, contained and
recycled in suitable containers.
2
Designated Equipment Use
These stationary screwdrivers can be used in conjunction with a
reduction gear only. They are designed to reduce hole centre distances
resp. to increase the torque value.
Screwdriver Spindles are constructed for the stationary use in
•
Lever Operated Single Spindle Screwdriving Stations
•
Construction Units
•
Multi-Spindle Screwdriving Stations
•
Robot End-Of-Arm Tooling
•
X-Y-Z Screw-Assembly Stations
These Spindles assemble screws to torque and measure that torque more
accurately than any subsequent testing method.
•
lubricating grease and oil
•
hydraulic fluid
•
cooling agents
•
solvent-containing cleaning agents
8