Acelity V.A.C.ULTA Safety Information And Application Instructions page 17

If 3M™ Cavilon™ No Sting Barrier Film is applied to area with skin folds or other skin-to-skin
d.
contact, make sure that skin-contact areas are separated to allow the film to thoroughly dry
before returning to normal position�
•
Allow 3M™ Cavilon™ No Sting Barrier Film to thoroughly dry before covering with
dressings�
•
Reapplication of 3M™ Cavilon™ No Sting Barrier Film is necessary each time
dressings are changed; the barrier film is removed by the V�A�C�® Advanced Drape
adhesive�
e. If desired, the film can be removed by using most medical adhesive removers as directed�
Clean and dry the involved area and reapply 3M™ Cavilon™ No Sting Barrier Film�
5. Ensure adequate hemostasis has been achieved (refer to Warnings, Bleeding section,
Hemostasis, Anticoagulants and Platelet Aggregation Inhibitors)�
6. Protect sensitive structures, vessels and organs (refer to Warnings, Bleeding section, Protect
Vessels and Organs)�
7. Sharp edges or bone fragments must be eliminated from wound area or covered (refer to
Warnings, Bleeding section, Sharp Edges)�
17