Solar Combination - Hitachi YUTAKI Series Instruction And Operation Manual

UNIT CONTROLLER

8.6.1.9 Solar Combination

Available if Solar combination (SOLStSet)= "Input demand" or "Total" In the "Complementary Heating" option of the "System
Configuration" menu.
REF Access
SOLOp Operation
SOlPt SOL Panel T
?
N O T E
(*1): If Solar combination (SOLStSet)= "Total control"
8.6.1.10 Alarm History
It shows the alarms of the system. To clear the selected alarms press "
8.6.1.11 Energy data
Available if Status (PMConf) or Capacity configuration (CAPCo.)= "Enabled" in "Optional functions" option of the "System
Configuration" menu and Controller type (LCDM)= "Unit" or "Unit + Room".
• Input Power (*1)
• Capacity (*2)
• Reset Values
?
N O T E
• (*1): If Status (PMConf)= "Enabled" in the "Optional functions" option of the "System Configuration" menu.
• (*2): If Capacity configuration (CAPCo.)= "Enabled" in the "Optional functions" option of the "System Configuration" menu.

Input Power
The following parameters can be displayed by each month selecting the specified month or for all the months selecting "Total".
REF Access
IpSH Space Heating
IpSC Space Cooling
IpDHW DHW
IpSWP Swimming pool
IpTot Total
135 PMML0335A rev.1 - 04/2016
Default
Description
Value
Solar Combination
Default
Description
Value
Input Power
Range Steps
- Demand ON/OFF
- -
".
Range Steps
- -
- -
- -
- -
- -
Units Application
S SC S80 M
- - ○ ○ ○ ○
- ºC ○ ○ ○ ○
Units Application
S SC S80 M
- kWh ○ ○ ○ ○
- kWh ○ ○ ○ ○
- kWh ○ ○ ○ ○
- kWh ○ ○ ○ ○
- kWh ○ ○ ○ ○
Notes
-
(*1)
Notes
-
-
-
-
-