Specifications - Allen-Bradley A Series Installation Instructions Manual

12 DeviceNet ArmorBlock™ Network Powered 16-input Module

Specifications

General Specifications
Attribute
Number of inputs
Input type
Off-state input voltage, max 5V DC
On-state input voltage, min 11V DC
On-state input voltage, nom 24V DC
On-state input voltage, max 25V DC
Sensor source voltage, min
Sensor source voltage, max 25V DC
Off-state input current, max 1.5 mA @ 5V DC
On-state input current, max 5 mA @ 25V DC

(1)
Input delay time
Off to On
On to Off
DeviceNet power
voltage range
Sensor source current
per module, max
DeviceNet current
Indicators
Isolation voltage
Communication rate
Dimensions (HxWxD),
approx.
Enclosure type rating
(2)(3)
Wiring category
Weight, approx.
Publication 1732D-IN007B-EN-E - November 2011
Value
16
61131-2 Type 3 compatible
11V DC
0...16,000 s
11...25V DC
500 mA
75 mA plus sum of sensor currents
1 green/red – module status
1 green/red – network status
16 yellow – input status
50V (continuous), Basic Insulation Type, inputs to network
No isolation between individual inputs
Type tested @ 707V DC for 60 s
125 Kbps @ 500 m (1640 ft) for thick cable, flat media length 375 m (1230 ft)
250 Kbps @ 200 m (600 ft) for thick cable, flat media length 150 m (492 ft)
500 Kbps @ 100 m (330 ft) for thick cable, flat media length 75 m (246 ft)
179 x 65 x 43.25 mm
(7.05 x 2.56 x 1.70 in)
Meets IP65/66/67/69K (when marked), and NEMA 4X/6P with receptacle
dust caps or cable termination
1 – on signal ports
2 – on communication ports
0.392 kg (0.864 lb)