Polycom RSS 4000 Getting Started Manual page 8

address bar, and then press Enter.
By default, Polycom® RSS™ 4000 Web server has an untrusted certificate and uses the
HTTPS protocol to set up SSL secure connection with client end.
•
If you use Internet Explorer as a browser, you will be prompted that the security certificate
for the website has some problem. Please choose Continue to this website to enter the
Login page.
•
If you use Firefox browser, you will be prompted that the connection is not trusted. Please
add the site being connected to Security Exception as suggested on the page and enter the
Login page.
After you install the security certificate issued by the Certification Authority in your system, you
will not receive this alert again.
(Optional) Select a language for the Web interface from the Select language list in
4
the top right of the page.
On the Login page, enter the administrator's username and password, and then
5
click the Log In button.
The default username and password are both admin.
The Product Activation page displays when you first-time log in. Enter the
6
activation key in the Activation Key box and click Update.
If you do not activate the system, you can still use the Web interface, but cannot perform calling,
recording, live streaming and video playing operations using the system.
When prompted to restart the system, select No to proceed with setting the IP
7
address.
Click System Config > IP Setting and configure the following parameters in the
8
Network Setting area.
Table 1-1 Signaling Network Parameters Description
Parameter
Obtain an IP Address
Automatically (DHCP)
Using the following IP
Address
Polycom® RSS™ 4000 Getting Started Guide – Version 7.0
Description
Specifies the system to obtain an IPv4 automatically.
Note: Obtaining an IP Address Automatically is not recommended.
For best results, the system should be configured with a static IP
address.
Specifies whether to use a static IPv4 address. You need to manually
enter the IP address and subnet mask.
5