Installing The Device; Plugging The Device Into The Vehicle Connector; Optional) Installing The Device By Extension Cord - MeiTrack TC68S User Manual

MEITRACK TC68S/TC68SG User Guide
login account from your provider.)
For more information about how to add a tracker, see the MEITRACK GPS Tracking System MS03 User Guide
(chapter 4 "Getting Started").
The MS03 supports the following functions:

Track by time interval or distance.

Query historical trips.

Set polygonal geo-fences.

Bind driver and vehicle information.

View various reports.

Send commands in batches.

Support OTA updates.
For details, see the MEITRACK GPS Tracking System MS03 User Guide.

6 Installing the Device

You can use any of the following ways to install the device.

6.1 Plugging the Device into the Vehicle Connector

The device is a plug-and-play device without wiring.
After the device is plugged into the vehicle's OBD II connector, the device will beep once, and all indicators will
blink, which indicates that the device is installed successfully.
Note: Ensure that the device is firmly connected to the vehicle connector.

6.2 (Optional) Installing the Device by Extension Cord

The extension cord is an optional accessory. If you additionally purchase this accessory, use this method to install
your device.
This installation method is a better choice on the conditions of narrow installation space and weak GPS signal, or
for hidden purpose.
Perform the following operations to install the device:
1) Stick two small suede Velcros to the labeled device surface and the connected surface of the extension cord.
2) Plug the male side of the extension cord to the vehicle OBD II connector.
3) Find a hidden place under the dashboard, and stick the big Velcro to the vehicle.
4) Attach the device with Velcro to the Velcro of the vehicle.
Note: You can also use cable ties and other ways to secure the device when there is enough space in the vehicle.
Copyright © 2019 Meitrack Group All rights reserved. - 13 -