Setting Authorized Phone Numbers - A71 - MeiTrack TC68S User Manual

MEITRACK TC68S/TC68SG User Guide
23Km/h Indicates the speed.
61% Indicates the remaining battery power.
http://maps.googl Indicates the map link.
e.com/maps?f=q Latitude: 22.540103
&hl=en&q=22.540 Longitude: 114.082329
103,114.082329
If your mobile phone does not support HTTP, enter the latitude and longitude on Google Maps to query a location.
More SMS commands
You can configure the device on a mobile phone or on a computer by using Meitrack Manager. For details, see
section 5.4 "Configuring Device Parameters by Meitrack Manager."
Note:
1. The default SMS command password is 0000. You can change the password by using Meitrack Manager and
SMS command.
2. The device can be configured by SMS command with a correct password. After an authorized phone number
is set, only the authorized phone number can receive the preset SMS event report.
5.3.1 Setting Authorized Phone Numbers – A71
SMS sending: 0000,A71,Phone number 1,Phone number 2,Phone number 3
SMS reply: IMEI,A71,OK
Description:
A phone number has a maximum of 16 bytes. If no phone numbers are set, leave them blank. Phone numbers are
empty by default.
Phone number 1: Set phone number 1 to an SOS phone number. When you call the device by using the phone
number, you will receive SMS notification about the location, geo-fence alert and low power alert.
Phone number 2/3: When you call the device by using these phone numbers, you will receive SMS notification
about the location.
If you need to delete all authorized phone numbers, send 0000,A71.
When the SOS button is pressed, the device will dial phone numbers 1, 2, and 3 in sequence. It will stop dialing
when one phone number answers. Meanwhile, the device will send alert information to phone number 1.
Copyright © 2019 Meitrack Group All rights reserved.
GPRS reaches the normal level.
Unit: km/h
None
None
- 10 -