Table of Contents
Advertisement
MEITRACK TC68S/TC68SG User Guide
5.4 Configuring Device Parameters by Meitrack Manager
This section describes how to use Meitrack Manager to configure the device on a computer.
Procedure:
1.
Install the USB driver and Meitrack Manager.
2.
Connect the device to a computer with the USB cable.
3.
Run Meitrack Manager, then the following dialog box will appear:
4.
Turn on the device, then Meitrack Manager will detect the device model automatically and the parameter
page will appear accordingly.
For details about Meitrack Manager, see the MEITRACK Manager User Guide.
5.5 Logging In to MS03 Tracking System
Visit http://ms03.trackingmate.com, enter the user name and password, and log in to the MS03. (Purchase the
Copyright © 2019 Meitrack Group All rights reserved.
- 12 -
Advertisement
Table of Contents
