System Setup; Tank Setup; Select The Tank Setup Menu; Setting Up Additional Tanks - Veeder-Root TLS-50 Setup And Operation

TLS-50 Setup

System Setup

From the System Setup display, scroll through the system setup options. Make changes as required following
options shown in Figure 6.
SYSTEM SETUP
PRESS

Tank Setup

The Tank Setup procedure allows you to enter information about each tank and the liquid contained in the tank. It
also allows you to set up the monitoring, reporting, and alarm features provided by the TLS-50. The data you enter
tells the system the number, location, and types of tanks, and establishes limits used to trigger alarms.

SELECT THE TANK SETUP MENU

From the Top Display Menu, scroll to the Tank Setup display. Make changes as required following options shown in
Figure 7.

SETTING UP ADDITIONAL TANKS

If you have additional tanks to set up, press the Select key to return to the TX: CONFIGURED display. Press the
Tank key to select the next tank, and enter data for the second tank. Repeat this procedure for each remaining
tank.
SYSTEM SETUP
LANG: ENGLISH
SYSTEM SETUP
UNITS: METRIC
SYSTEM SETUP
PRINT TC VOL: YES
SYSTEM SETUP
TC REF: +015.0 DEG C
Figure 6. System Setup Menu
10
Select the language used for displays and printouts
Options: English, French, Spanish, Portuguese,
or Mandarin Chinese
Select units of measurement used for displays and
printouts.
Options: U.S. or Metric
Include a column for Temperature Compensated
Volumes in the Inventory Report
Options: Yes or No
Enter a Temperature Compensation reference value
to which TC volumes will be adjusted automatically.
Options: any value within a range of -40 to +120˚F
(-40 to +60˚C)
consoles\tls50\50sysset.eps
System Setup