The Wireless Telephone Headset - SpectraLink 410 User Manual

SpectraLink Corporation
Backlight
(PTB450 only)

The Wireless Telephone Headset

Ringing with headset To hear ringing through a headset, the ring type must be set to
Answer a call To answer a call when your headset is plugged in, press any key
Low headset volume The speaker volume level can be adjusted separately for headset use.
Part Number: 72-0035-51-I.doc
The backlight comes on when any key is pressed or when there is an
incoming call and stays on for ten seconds. It turns off after ten
seconds if another key is not pressed within that period.
SpectraLink offers optional headsets for use in noisy environments
or if you need to have your hands free while talking on the Wireless
Telephone.
To use the headset, simply plug it into the jack on the side of the
Wireless Telephone. The headset is specially designed to work
properly with The Link Wireless Telephone. We do not recommend
using other headsets.
SOFT .
except PWR or END .
Plug the headset in and press
keypad to enter a volume level from
sets the low volume. High volume is automatically set two levels
higher than low volume. Toggle between high and low volume by
pressing the key while in a call.
VOL
Link Wireless Telephones and Accessories User Guide
FCN until VOLUME displays. Use the
(softest) to (highest). This
1 8
Page 8