Operating Instructions; Basic Operation - SpectraLink 410 User Manual

SpectraLink Corporation

Operating Instructions

Basic Operation

Turn the Wireless Telephone on Press the
Turn the Wireless Telephone off Press the
Place a call Press the
Mute microphone To mute the microphone so you can hear but won't be heard, press
Answer a call The Wireless Telephone will ring or vibrate to alert you.
Access telephone system
features
Change volume The Wireless Telephone has two volume levels, low and high. Set
Part Number: 72-0035-51-I.doc
PWR key for about one second. You will hear a double
chirp. Your extension will display. The
briefly. When it goes out, you are ready to make and receive calls.
PWR key for about one second. You will hear a single
chirp.
If you accidentally turn your Wireless Telephone off during a
conversation, you can restore your conversation by pressing the
key and then the
PWR START
talking to has not hung up.
START key, wait for dial tone, then dial the number. Dial
calls with the Wireless Telephone exactly as with your desk phone.
Your telephone system may require you to select a line by pressing
the LINE key, followed by a line number.
To hang up when you've finished the call, press the
Do not use the key to end a call, because that will turn your
PWR
Wireless Telephone off and you will not receive calls until you turn
the Wireless Telephone back on.
then press 1.
FCN MUTED
display. Press FCN then 1 again to restore voice pickup.
Additionally, a line indicator on the display may flash, and the
display may show information about the call, such as caller's name
and extension.
To answer a call, press the
ear.
If you are on a call and hear subdued ringing, a call is coming in on
a second line. To answer this call, put your first call on hold and
press the key then the line number of the second call.
Line
To access the features of your telephone system from the Wireless
Telephone, press FCN anytime while in a call to display a menu of
available features. Press the key(s) for the desired feature, or press
FCN again to display more options. Select
If your telephone system supports softkeys, pressing
access to softkey functions. You will need to press
display the feature menu.
Because softkey and system features vary, your system administrator
will explain them for your telephone system.
the low volume level by pressing
keypad to select a level from
is automatically set two levels higher than low volume. Toggle
between high and low volume by pressing the
call.
Link Wireless Telephones and Accessories User Guide
NO SVC message will display
key, provided the person you are
appears on the Wireless Telephone
START key and hold the earpiece to your
EXIT MENUS
FCN until VOLUME
1 (softest) to 8 (loudest). High volume
VOL
END key.
to exit.
FCN provides
twice to
FCN
displays. Use
key while in a
Page 7