No representation or other affirmation of fact contained in this document including but not limited to statements regarding capacity, response-time performance, suitability for use, or performance of products described herein shall be deemed to be a warranty by SpectraLink for any purpose, or give rise to any liability of SpectraLink whatsoever.
Page 3
Available at: http://www.spectralink.com/consumer/resources/interface_guides.jsp. Contacting SpectraLink SpectraLink wants you to have a successful installation. If you have questions please contact our Customer Support Hotline at (800) 775-5330. The hotline is open Monday through Friday, 6:00 a.m. to 6:00 p.m. Mountain time.
Page 4
This manual uses the following icons and conventions. Caution! Follow these instructions carefully to avoid danger. Note these instructions carefully. NORM This typeface indicates a key, label, or button on SpectraLink hardware. Part Number: 72-0171-13-C.doc LinkPlus Interface Guide Siemens ROLM PBX System...
Page 5
See Link 3000 MCU: Operator’s Console, Link 150 M3 MCU: Installation and Operation, or NetLink Telephony Gateway: Installation, Configuration, and Administration. The following information will help the system administrator set up the SpectraLink handsets to operate in a way that feels familiar and comfortable to users. Plan Programming...
Page 6
The system administrator may use the Extension Assignments Worksheet at the end of this document to track the port numbers, extensions, users, and features assigned to handsets. Part Number: 72-0171-13-C.doc LinkPlus Interface Guide Siemens ROLM PBX System Page 6...
SpectraLink Corporation The SpectraLink Wireless Telephone Display The Link Wireless Telephone has a two-line, 16-character alphanumeric display. Certain characters may be used by the system that are not implemented in the handset. Flashing characters are not implemented on the handset, nor is rolling or scrolling of text.
Page 8
Link 3000 MCU The function menu text defaults for the handsets associated with the Link 3000 MCU can be changed via the SpectraLink Operator’s Console. Link 150 MCU For the Link 150 MCU, the handset function menu text can only be changed via remote configuration through the services of SpectraLink’s Customer Support.
Page 9
Call progress tones provided by the host system will be passed through to the handset. Part Number: 72-0171-13-C.doc ) on the handset is activated with the message LinkPlus Interface Guide Siemens ROLM PBX System Page 9...
Page 10
Type and press enter to change this field, from the Submenu of PBX types, select Siemens Rolm. Refer to NetLink Telephony Gateway: Installation, Configuration, and Administration for details on configuring the Telephone Switch Type. Part Number: 72-0171-13-C.doc LinkPlus Interface Guide Siemens ROLM PBX System Page 10...
Page 11
[number] labels represent the key sequence on the XFER CONF SV RPT CAMP STA SP LinkPlus Interface Guide Siemens ROLM PBX System FCN + 0 FCN + 6 FCN + 1 FCN + 2 label indicates FCN * Page 11...
Page 12
(above Call Waiting, accessed by not change the assignments for Message Waiting, Hold, Connect, Mute or Transfer; however, other features and the "Open" buttons can be re-assigned if desired. Part Number: 72-0171-13-C.doc Siemens ROLM PBX System OPEN FORWD SYSSP...
Page 13
Conference – Drop Designated Call Hold Hold Return Part Number: 72-0171-13-C.doc LinkPlus Interface Guide Siemens ROLM PBX System START – dial number – END START – dial number – START START - ****4 – START START - **4x – START...
Need help?
Do you have a question about the ROLM PBX and is the answer not in the manual?
Questions and answers