Overview; Status Indicators; Quick Start Guide - SpectraLink 410 User Manual

SpectraLink Corporation

Overview

Registered model numbers
Customer support hotline

Status Indicators

NO SVC The Wireless Telephone cannot receive or place calls. You may be

Quick Start Guide

Power on
Power off
Answer call
Hang up
Place call
Select line
Adjust volume during call
Put call on hold
Mute/Unmute microphone
Part Number: 72-0035-51-I.doc
Your Link Wireless Telephone is a state of the art communication
device that utilizes radio wave technology to send and receive voice
transmissions. It is designed to operate like the familiar cell phone.
However, the Wireless Telephone utilizes the private telephone
system installed in your facility and will not operate outside the area
reached by this system.
The following guide is meant to provide general information about
your Wireless Telephone. Contact your system administrator for
additional information on how your Wireless Telephone functions
within your telephone system.
This document covers registered model number:
PTB400
SpectraLink wants you to have a successful installation. If you have
questions please contact our Customer Support Hotline at (800)
775-5330. The Hotline is open Monday through Friday, 6:00 a.m. to
6:00 p.m. Mountain Time.
outside of the coverage area. Walk back into the covered area.
BATT Your Battery Pack charge is low. You will also hear a beep in the
earpiece. Your Battery Pack needs to be recharged.
MSG You have a voicemail message.
Link Wireless Telephones and Accessories User Guide
Press and hold PWR until double chirp, then
release
Press and hold until single chirp, then
PWR
release
Press
START
Press END
Press , dial number
START
Press START then press LINE
number ( - )
1 9
Press while you are talking to toggle
VOL
between base volume level and a louder volume
level
Press HOLD
Press then 1
FCN
, then select line
Page 6