Antennas - HP EliteDesk 800 G3 TWR Maintenance And Service Manual

Antennas

The antennas route from the WLAN module to the front and the rear of the computer.
To replace the antennas:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the drive cage
4. From the front of the computer, remove the Torx T15 screw that secures the antenna to the computer.
NOTE:
68 Chapter 4 Removal and replacement procedures – Microtower (MT) chassis
(Access panel on page
(Drive cage on page
Chassis color may vary.
(Preparation for disassembly on page
20).
28).
19).