Table of Contents
Advertisement
0
34
Chapter 5 Appendix
Updating the firmware
Update the camera and sensor unit firmware using
the following steps.
1
Access the Sony Professional website via the
following URL.
https://pro.sony/ue_US/products/
multispectral-cameras/msz-2100g
2
Download the firmware for the product in
[Resources and downloads] on the above
page.
3
Copy the firmware to the root directory on the
microSD card and insert it in the camera.
4
Turn the camera on while holding the camera
shutter button down. When the camera status
indicator alternately flashes blue and purple,
release the shutter button.
The firmware update then begins. Wait two to
three minutes.
When the camera status indicator flashes
green, the camera firmware update is
complete.
5
Disconnect the mobile battery cable and
restart the camera and sensor unit.
If the sensor unit firmware must be updated,
the camera status indicator alternately flashes
blue and purple again and the update begins
automatically.
When all updates are complete, the camera
and sensor unit status indicators both flash
green.
Advertisement
Table of Contents
