Table of Contents
Advertisement
0
20
Chapter 4 Shooting : Before Shooting
Connecting the camera and sensor
unit
Check the connection between the camera and
sensor unit, and follow the instructions below to
connect the two if the cable has been removed.
1
Make sure the connecting cable is oriented
correctly and connect it to the camera EXT
terminal.
DC IN 5V
EXT
2
Make sure the other end of the connecting
cable is oriented correctly and connect it to
the sensor unit HOST terminal.
Make sure it is securely connected with a
clicking sound.
HOST
[Caution]
Connect the camera and mobile battery after the drone has
been powered on. Do not connect the camera and mobile
battery yet.
Preparing the drone
Attach the battery and propellers to the drone and
connect the iPad and controller.
Begin operations after you have confirmed that
the drone battery, controller, and iPad are fully
charged.
For details on how to attach these items, refer to the drone
manual.
1
Securely attach the battery to the drone.
2
Securely attach the propellers to the drone.
3
Attach the iPad to the controller and make
sure it is secured.
4
Use the controller cable to connect the iPad
and controller.
Advertisement
Table of Contents
