Creating A Flight Plan - Sony MSZ-2100G Operation Manual

0
14 Chapter 3 Preparation

Creating a Flight Plan

This section describes how to create a flight
plan using the recommended Map Pilot for DJI -
Business.
For parameter settings, see "Parameter setting" (page 18).
[Notes]
The images in this section are taken from the Map Pilot
for DJI - Business 3.1.4 version. The actual images that are
displayed during operations may differ.
Precautions when creating a flight plan
The base map must be downloaded from the
network before creating a flight plan. Make sure
you are connected to the network when creating
a flight plan.
Configuring basic information
Set the camera functions and other basic
information.
1
Launch Map Pilot for DJI - Business.
The home screen appears.
2
Tap [Settings].
The "Settings" screen appears.
3
Tap [FLIGHT CAMERA] > [Model].
The "Model" screen appears.
4
Select [Sony MSZ-2100G] and tap [Settings].
The "Settings" screen reappears.
5
Select the following application settings.
[Metric]: On
[Movable Home Point]: Off
[Point Down to Aid Landing]: On
[Show Image Footprint]: On
[Show Nearby Cached Missions]: Off
[Show Aircraft According to Light
Conditions]: Off
6
Enter the AIRDATA UAV user token in [FLIGHT
LOG STORAGE] > [Airdata User Token].
This is required for viewing the flight record in
AIRDATA UAV.
For details on AIRDATA UAV, see "Setup flight log recording"
(page 11).
7
When all settings are complete, tap [Done] on
the upper right of the screen.
Creating a new mission
Set a flight path for efficiently photographing the
agricultural field and create a mission.
1
In the Map Pilot for DJI - Business home screen,
tap [Create New Mission].
The mission creation screen appears.
2
Set waypoints (see Glossary) for the agricultural
field you want to photograph.
Set them slightly larger than the actual
agricultural field so that shooting is accurate.
3
Set a preliminary home point.
If you set a home point (purple), the flight path
is automatically created.
[Notes]
The preliminary home point is used to create the
mission, and does not need to be an accurate position.
The actual home point is reset using the location
received by GNSS when the flight is started.
4
Adjust the flight path as necessary.
Adjust the flight path direction according to
the shape and ridge direction of the
agricultural field.