Table of Contents
Advertisement
0
19
Chapter 4 Shooting
Before Shooting
This section describes what to prepare on the day
you want to shoot.
Checking the microSD card
ˎ Make sure there is sufficient free space on the
ˎ
microSD card (32 GB recommended).
It is also recommended to format the microSD
card if the card is used more than 10 times or so,
to secure stable picture file storing.
ˎ Change "ShutterInterval" if necessary.
ˎ
For details on the configuration file, see "Configuration file"
(page 17).
When conducting long flights
Check the following when conducting long flights
(approximately 40 minutes).
ˎ Make sure there is sufficient free space on the
ˎ
microSD card. Approximately 15 GB is required
for RAW data.
ˎ Make sure auto sleep on the computer using
ˎ
Fast Field Analyzer is disabled.
ˎ Make sure the computer using Fast Field
ˎ
Analyzer has sufficient storage space.
Approximately 30 GB is required for stitch data.
Installing the mobile battery
Insert a fully charged mobile battery.
Make sure the mobile battery is oriented correctly
and install it fully.
For information on how to insert it, refer to the bracket manual.
[Caution]
Only use the designated mobile battery. Using any other
battery could cause it to rupture.
Inserting the microSD card in the
camera
1
Put a fingernail under the microSD card cover,
and lift it in the direction indicated by the
arrow.
Put a fingernail under and lift.
[Caution]
Do not pull on the cover excessively. Doing so could
damage the cover.
2
Make sure the microSD card is oriented
correctly and press it in until you hear a click.
Insert it with the printed side up.
Printed surface
[Caution]
Forcibly inserting a microSD card in the improper
orientation may damage the microSD card or microSD
card slot.
3
Close the microSD card cover.
How to remove the microSD card
Lightly push the microSD card once and pull it out.
[Caution]
ˎ Be careful to avoid dropping the microSD card when
ˎ
inserting or removing it.
ˎ ˎ Do not remove the microSD card or disconnect the cables
while the access indicator is flashing. Doing so could
corrupt the data on the microSD card.
[Notes]
When finished, close the microSD card cover.
Advertisement
Table of Contents
