Chapter 3 Preparation; Configuring The Drone - Sony MSZ-2100G Operation Manual

Multispectral sensing unit. ffa-pcw fast field analyzer.
Table of Contents

Advertisement

0
12

Chapter 3 Preparation

Configuring the Drone

Use DJI GO4 to update the drone firmware to the
latest version and set the maximum flight altitude
and RTH (see Glossary) altitude.
Launching DJI G04
1
Attach the remote control to the iPad, then
use the controller cable to connect the remote
control to the iPad.
2
Attach the battery to the drone and turn the
drone on.
3
Turn the remote control power on.
4
Launch DJI G04 on the iPad.
If the drone, remote control, and iPad are
connected correctly, the setting status list
currently specified on the drone appears as a
pop-up.
5
Check the current status and close the pop-up
window.
6
Tap [...] on the top right of the screen.
A window for configuring settings appears.
Select the item you want to configure in the
menu bar on the left side of the menu
window.
Menu bar
For details on items and how to configure settings, refer to
the manual provided by DJI.
https://store.dji.com/guides/dji-go-4-manual/
Updating the drone firmware
Update the drone firmware to the latest version.
For further details, refer to the drone manual.
Configuring the drone
Correctly set the maximum flight altitude and
return to home altitude (RTH altitude). Refer to
the bracket manual and change the obstacle
avoidance sensor settings when necessary.
[Notes]
Before each day's flight, check to make sure the DJI GO4
settings are exactly as you want them to ensure a safe flight.
How to set the flight altitude
Select
(Main Controller Settings) on the menu
bar and configure the following items.
[Return-to-Home Altitude]: Set to 120 m or less.
[Set Max Flight Altitude]: 120 m
[Notes]
If an automatic flight is designed and executed at a setting
that is less than the RTH altitude, the drone will climb to the
RTH altitude and return home during RTH.

Advertisement

Table of Contents
loading

Table of Contents