Table of Contents
Advertisement
0
26
Chapter 4 Shooting : Checking Flight Success
When you did not obtain the desired data
If the flight or shooting failed and you were not
able to obtain the desired data, click [Cancel] to
return to the "Field List" screen.
Execute the flight again and retake the images.
Generating stitched images
Link imported flight data to generate a stitched
image.
1
Click [Next] on the bottom left of the screen.
The "Flight Data Confirmation" screen appears
and each flight data set appears with
unnecessary data removed.
2
In the [Event] pane, set the event date and
time (shooting date and time).
When the folder name is output as-is from
the camera ("YYYYMMDDhhmmss" format)
The date and time is automatically converted
to the local standard time and displayed based
on the folder name.
[Caution]
The event time is based on the time zone setting of your
computer. If the flight happens in different time zone,
you may need to adjust the event time manually.
When the folder name is not in
"YYYYMMDDhhmmss" format or when
adjusting the date and time manually
Click the event pane and click [+ Add New
Event] when it is displayed.
Click the date/time item, select a day on
the displayed calendar, then click [OK].
Click [Current Date and Time] to set the
current date and time.
Select a time (hours : minutes : seconds),
and click [OK].
In the "Add New Event" dialog box, click
[OK].
The date and time are set as an event
name.
3
In the [Flight Data Setting] pane, select the
stitch mode.
Advertisement
Table of Contents
