Table of Contents
Advertisement
0
25
Chapter 4 Shooting
Checking Flight Success
Use Fast Field Analyzer to confirm that the drone
has flown according to the flight plan, and make
sure there are no missing images due to sudden
weather condition change such as strong gust,
before generating stitched map.
This section describes rough procedures for doing
so.
For detailed instructions on how to use Fast Field Analyzer, refer
to the Fast Field Analyzer User' s Guide (PDF).
Importing flight data
1
Using the SD card adapter, insert the microSD
card containing flight data into a computer.
2
Launch Fast Field Analyzer.
3
In the "Farm List" screen [Farm List] pane, click
for the farm to import flight data to, or
double click the farm column.
The "Field List" screen appears.
4
Click [Import Flight Data] on the bottom left of
the screen.
The "Select Folder" screen appears.
5
Select the folder that contains flight data and
click [Select Folder].
You can also select multiple folders.
The flight data is imported, and the location
and projection when images recorded by the
camera are mapped are displayed in the
"Flight Data Selection" screen.
Checking the flight path
You can check whether or not the drone flew according to the flight plan and whether any recorded
images are missing.
Green circles: Location recorded by the camera
Blue squares: Projections of captured images.
Check if images are overlapped and that
there are no missing images.
[Notes]
ˎ Recorded images outside the field cannot be used for stitching.
ˎ
ˎ If the flight path crosses multiple fields, each field is split to display images.
ˎ
If there are missing images, see "Troubleshooting" (page 35).
Gray circles: If the recorded image is completely
outside of the field, the recorded area is displayed
in black and you will not be able to make a
selection or do anything else.
Advertisement
Table of Contents
