Table of Contents
Advertisement
0
38
Chapter 5 Appendix : Maintenance and Usage Precautions
When replacing a computer
If you need to replace the computer that Fast Field
Analyzer is installed on due to malfunction or when
purchasing a new computer, flight data must be
restitched and POI/ROI must be reconfigured.
1
Deactivate the license being used on your
current computer.
In Fast Field Analyzer on your current
computer, click [License] in the upper left of
the screen, then click [Deactivate] in the dialog
box that appears, and remove the license
currently in use.
If you cannot use Fast Field Analyzer on your
current computer, deactivate it from the Sony
Creative Software site.
https://www.sonycreativesoftware.com/jp/
myaccount/smartag
2
Install Fast Field Analyzer on your new
computer.
3
Launch Fast Field Analyzer and activate the
license.
See "Launching and Ending the Software" in the Fast Field
Analyzer User' s Guide (PDF).
4
Configure the settings.
See "Configuring Basic Information" and "Setting a Field
(Using the Software for the First Time)" in the Fast Field
Analyzer User' s Guide (PDF).
5
Use the backup flight data to create stitched
images.
See "Checking Flight Data" in the Fast Field Analyzer User' s
Guide (PDF).
6
Reset the POI/ROI information.
See "Checking Crop Health" in the Fast Field Analyzer User' s
Guide (PDF).
Computer OS backup
Make periodic backups on a computer that
has Fast Field Analyzer installed. Windows 10 is
equipped with a standard backup feature. See the
Microsoft website for instructions.
About GNSS
This product can receive GPS/GLONASS satellite
signals.
ˎ As the positions of GPS/GLONASS satellites vary
ˎ
constantly, it may take longer to determine
the location or the receiver may not be able to
determine the location at all, depending on the
location and time you use the product.
ˎ This is a positioning system that receives signals
ˎ
from GPS/GLONASS satellites. Avoid using
the product in places where radio signals are
blocked or reflected, such as a shadowy place
surrounded by buildings or trees, etc. Use the
product in open sky environments.
ˎ Position information may not be recorded
ˎ
accurately in locations or situations such as the
following where GPS/GLONASS satellite signals
may not reach.
– In tunnels, indoors or under the shade of
buildings.
– Between tall buildings or at narrow streets
surrounded by buildings.
– In underground locations, locations
surrounded by dense trees, under an elevated
bridge, or in locations where magnetic fields
are generated, such as near high voltage
cables.
– Near devices that generate radio signals of
the same frequency band as the product: near
1.5 GHz band mobile telephones, etc.
On triangulating errors
Positioning may take longer if the product is
moved directly after GPS/GLONASS satellite
positioning begins.
The triangulating error allowed by the GPS/
GLONASS satellites is about 10 m (33 feet).
Depending on the environment of the location,
the triangulating error can be greater. In this case,
your actual location may not match the location
on the map based on the GPS information.
Note that GPS satellites are managed by the U.S.
Department of Defense, and GLONASS satellites
are managed by the Roscosmos State Corporation
for Space Activities, and the accuracy of these
assets has been intentionally modified.
On the restriction of use of GPS
Make sure to follow the laws and regulations of
each country and region.
On the geographic coordinate system
This product uses GPS satellite WGS-84 and
GLONASS satellite PZ-90 for geographical
coordinate systems.
Advertisement
Table of Contents
