Table of Contents
Advertisement
00
5
Chapter 1 Overview : What is Smart Agriculture Solution?
Fast stitching
You can record images that efficiently overlap
the drone's flight route on each side. Because the
process can be completed by capturing a minimal
number of images, the processing time for image
stitching is significantly reduced. After the flight is
complete, you can check whether or not the flight
and shooting was successful on the spot, and check
the status of vegetation.
Efficiently overlapped and photographed
Centralized management of multiple
farms
Using the Fast Field Analyzer specialized software,
you can define "Farms" (see Glossary) and define
multiple areas in the farm that you wish to stitch
together as "Fields" (see Glossary) for managing
vegetation analytics. Images recorded according
to the drone flight plan are stitched within the
scope of the field definition and displayed. You can
register multiple farms in Fast Field Analyzer.
Farm
Flight plan
Field
Generating stitched images
You can quickly generate stitched images from flight data recorded with the camera to check vegetation
status. You can set POI or ROI at spots or areas in your concern. It is also possible to show NDVI and RGB
images in side-by-side view.
NDVI color map
You can adjust the NDVI (see Glossary) stitched image
color to make it easier to understand vegetation status.
NDVI image
POI, ROI
You can specify spots and areas of concern in stitched images.
Stitched image
Flight data recorded by the drone-
mounted camera is stitched and displayed.
RGB image
Viewing original images recorded by
the camera
You can zoom in and display the original images
used for stitched images to view details of
vegetation status in areas of concern.
Compare past stitched data
In Fast Field Analyzer, you can compare past
stitched images and analytics results to view
trends in vegetation status. You can also compare
the surface area of abnormal zones.
Convert to data for creating
orthoimages
If you want to use flight data with third party
image processing software, you can convert it to
data for creating orthoimages (see Glossary).
Advertisement
Table of Contents
