CONFIGURATION OF ETHERNET COMMUNICATION
Figure 9.19:
Make the following settings in the
Activated
• Select the
Mode
• Select
If you select
Settings for the Ethernet output of target/actual value deviation
CONFIGURATION > PROGRAM
Select
Select the active check program (
CONFIGURATION > PROGRAM > Tools > Output > Ethernet
Select
TOOL CONFIGURATION - Ethernet
The
TOOL CONFIGURATION - Ethernet
Figure 9.20:
Output activated
Select the
Leuze electronic
TCP/IP PROCESS DATA
checkbox.
Server
Client
:
or
.
Client
mode, you must configure host communication.
Rack Near
checkbox.
Extended configuration – Leuze electronic webConfig tool
dialog:
.
Rack Far
or
).
dialog is displayed.
dialog
LSIS 472i
dialog
.
45