Figure 9.18: Settings for FTP output
Make the following settings:
Activate image transfer:
•
Image name:
•
The image name must not contain any space characters.
Image filing:
•
Click on the [Save changes] button.
9.3.14 Configuring the Ethernet output
Check-program-specific output of test results on the Ethernet interface via the Ethernet protocol.
CONFIGURATION > DEVICE > Communication > Process - Ethernet
Select
CONFIGURATION OF ETHERNET COMMUNICATION
The
Leuze electronic
select the two checkboxes.
assign an image name, e.g., "HBS1_rack1".
with time stamp
select the
Extended configuration – Leuze electronic webConfig tool
option.
dialog is displayed.
LSIS 472i
.
44