TOOL CONFIGURATION - Digital I/O
Figure 9.13:
For each switching output, select the desired measurement value that is to be output via the switching
output.
Click on the [Save changes] button.
The smart camera makes available digital switching outputs -X, +X, -Y, +Y. In addition, the status of these
switching outputs appears on the display.
The target position is located within a rectangular tolerance area. Depending on the X deviations and Y
deviations, the switching outputs are switched as follows.
• IO5=-X
• IO6=+X
• IO7=+Y
• IO8=-Y
Leuze electronic
Extended configuration – Leuze electronic webConfig tool
dialog
LSIS 472i
40