BLOB prefiltering
Figure 9.9:
Area
attribute: adjust the NOMINAL limit values if the geometry of the marking has changed.
Shape factor
Centroid X
Centroid Y
,
9.3.8
Configuring the measurement
CONFIGURATION > PROGRAMS
Select
Select the active check program (
CONFIGURATION > PROGRAM > Tools > Measurement > Testing
Select
Measurement - Testing
The
Measurement - Testing
Figure 9.10:
Define the limits for the measurement.
Leuze electronic
dialog
attribute: adjust the NOMINAL limit values if the geometry of the marking has changed.
attributes: the limits of the centroid values must not be changed.
Rack Near
dialog is displayed.
dialog
Extended configuration – Leuze electronic webConfig tool
.
Rack Far
or
).
LSIS 472i
.
37